Malaysia

Insert Degsination Grade I s P/r Direction OFMT 05T305 TN LT30 5 3,97 0,8 Right
Multi purpose45 degree milling inserts, with 8 cutting edges and flat rake surface.

Insert Degsination Grade I s P/r Direction RDMT 0602 MO LT30 6 2,38 3 Neutral
Multi purpose Round inserts. Suitable for Roughing to Semi-finishing Copying of 3D surfaces and Face milling operations.<

TANCUT

B2000 HIGH PERFORMANCE

FICUT
M24 General Purpose

Variable Pitch

DTCUT
B2000 EXTREME CUTTING RATE

Benefits:

• Special designed high-low

AA CUT B2000 GENERAL PURPOSE Benefits: 

• The all-purpose blade meets different demands.<

Threads: For Unified Threads

Class : 2B

Threads : For Unified Threads 

Class : 2B

Threads : For Unified Threads 

Class : 2B

Threads : For Unified Threads

Class: 2B

Threads : For Whitworth Threads 

Class : Old JIS Class 2
Flutes : Spiral Pointed Taps 

Threads : For Whitworth Threads

Class : Old JIS Class 2

Threads : For Whitworth Threads 

Class : Old JIS Class 2

Threads : For Metric Threads

Class : 6H, Old JIS Class 2

Threads: For Unified Threads
Class: 2B
Flutes: Thread Forming Taps
Tolerance Class: YAMAWA G Class
Oil Grooves: ~ NO.4 = 0, NO.5

Threads: For Unified Left Hand Threads
Class: 2B
Flutes: Spiral Pointed Taps
Tolerance Class: YAMAWA P Class
Chamfer Length: 5 Pitches

For more information, please refer to the attachment.

Threads: For Whitworth Threads
Class: Old JIS Class 2
Flutes: Spiral Pointed Taps
Tolerance Class: YAMAWA P Class
Chamfer Length: 5 Pitches

For more information, please refer to the attachment.

Threads: For Metric Left Hand Threads
Chamfer Length: Front Face 2 ~ 2.5 Pitches
                            Rear Face 1 ~ 1.5 Pitches
*NO.

Threads: For Metric Threads
Chamfer Length: Front Face 2 ~ 2.5 Pitches
                            Rear Face 1 ~ 1.5 Pitches
*NO.

High Helix Spiral Flutes Center Drills- Type B, 60º

High Helix angle type, suitable for mahcining rather stringly material (such as SUS) and especially soft material.

 

Code No.<

Threads: For Whitworth Left Hand Threads
Class: Old JIS Taps 2
Flutes: Spiral Fluted Taps (Left 40º)'
Tolerance Class: YAMAWA P Class
Chamfer Length: 2.5 Pitches

Code No.<

Threads: For Metric Left Hand Threads
Class: 6H, Old JIS Class 2
Flutes: Spiral Pointed Taps
Tolerance Class: YAMAWA P Class
Overall Length: 100, 150
Chamfer Length: 5 Pitches

​

Code No.<

Threads: For Unified Threads
Class: 2B
Flutes: Spiral Pointed Taps
Tolerance Class: YAMAWA P Class
Chamfer Length: 5 Pitches

For more information, please refer to the attachment.